Potential Difference Formula: 8 Equations, Units, and Worked Examples
For a reliable reference, consult OpenStax section on electric potential and potential difference.
The potential difference formula is V = W/Q, which defines potential difference as the energy transferred per unit charge between 2 points. Ohm’s law, V = IR, and the field relation, V = Ed, give 2 other common forms. This article covers 8 formulas, the SI unit, calculation steps, 5 worked examples, series and parallel rules, and common mistakes.
What Is Potential Difference?
Potential difference is the energy transferred per unit charge when a charge moves between 2 points, and it is measured in volts (V).
The symbols for potential difference are V and ΔV. According to OpenStax University Physics Volume 2, the potential difference between points A and B is the change in potential energy of a charge moved from A to B, divided by the charge. Voltage is the common name for potential difference. A 12.0 V car battery gives 12.0 J of energy to each coulomb of charge that passes through it.
What Is the SI Unit of Potential Difference?
The SI unit of potential difference is the volt (V), where 1 V = 1 J/C. The unit honors Alessandro Volta. The equivalent forms are 1 V = 1 W/A and 1 V = 1 Ω × 1 A. In SI base units, 1 V = 1 kg·m²·s⁻³·A⁻¹.
What Is the Potential Difference Formula?
The potential difference formula is V = W/Q, where V is the potential difference in volts, W is the energy transferred in joules, and Q is the charge in coulombs. Physics textbooks write the same relation as ΔV = ΔU/q, where ΔU is the change in electric potential energy of a charge q.
Table 1 lists 8 potential difference formulas with their names and variables.
Table 1: Potential difference formulas
| No. | Formula | Name or use | Variables and SI units |
|---|---|---|---|
| 1 | V = W/Q | Energy form | W = energy transferred in J, Q = charge in C |
| 2 | ΔV = VB − VA | Subtraction form | VB and VA = electric potentials at points B and A, in V |
| 3 | V = IR | Ohm’s law | I = current in A, R = resistance in Ω |
| 4 | V = P/I | Power form | P = power in W, I = current in A |
| 5 | V = Ed | Uniform electric field | E = field strength in V/m, d = separation along the field in m |
| 6 | ΔV = kQ(1/rB − 1/rA) | Point charge | k = 8.99 × 10⁹ N·m²/C², Q = source charge in C, rA and rB = distances in m |
| 7 | V = Q/C | Capacitor | Q = stored charge in C, C = capacitance in F |
| 8 | V = ε − Ir | Battery terminal voltage | ε = EMF in V, I = current in A, r = internal resistance in Ω |
What Is the Potential Difference Formula in Terms of Energy and Charge?
V = W/Q gives the potential difference from the energy transferred and the charge moved. The rearranged forms are W = QV and Q = W/V. The electron-volt (eV) is the energy gained by a fundamental charge through a potential difference of 1 V, and 1 eV = 1.602 × 10⁻¹⁹ J.
What Is the Potential Difference Formula in Ohm’s Law?
V = IR gives the potential difference across a resistor from the current and the resistance. The relation holds for ohmic conductors, where the potential difference is proportional to the current.
What Is the Potential Difference Formula for a Uniform Electric Field?
V = Ed gives the magnitude of the potential difference between 2 points separated by a distance d along a uniform field E. The signed form is E = −ΔV/Δs, and the minus sign shows that the field points in the direction of decreasing potential.
What Is the Potential Difference Formula for a Point Charge?
ΔV = kQ(1/rB − 1/rA) gives the potential difference between 2 points at distances rA and rB from a point charge Q. The potential at 1 point is V = kQ/r, with zero potential at infinite distance. Electric potential is a scalar, so the potentials of several charges add algebraically.
What Is the Potential Difference Formula for a Capacitor?
V = Q/C gives the potential difference across a capacitor from its stored charge and capacitance. Capacitance is the charge stored per volt, C = Q/V.
What Is the Terminal Potential Difference of a Battery?
The terminal potential difference is V = ε − Ir, where ε is the EMF and r is the internal resistance. A 12.0 V battery with an internal resistance of 0.50 Ω that supplies 4.0 A has a terminal potential difference of 12.0 − (4.0 × 0.50) = 10.0 V.
How Do You Calculate Potential Difference Step by Step?
To calculate potential difference, identify the known quantities, select the matching formula, convert to SI units, substitute the values, and state the result in volts. The 5 steps are:
- List the known quantities: energy and charge, current and resistance, power and current, or field and distance.
- Select the formula from Table 1 that uses those quantities.
- Convert all values to SI units: joules, coulombs, amperes, ohms, and meters.
- Substitute the values and calculate V.
- State the answer in volts (V) with its sign, if the polarity matters.
What Are 5 Worked Examples of the Potential Difference Formula?
The 5 worked examples below calculate potential difference from energy and charge, a resistor, power, a uniform field, and a point charge.
How Do You Find Potential Difference From 36 J of Energy and 3.0 C of Charge?
- Given: W = 36 J and Q = 3.0 C.
- Formula: V = W/Q.
- Calculation: V = 36 / 3.0.
- Answer: V = 12 V.
How Do You Find Potential Difference Across a 20 Ω Resistor With a 0.50 A Current?
- Given: I = 0.50 A and R = 20 Ω.
- Formula: V = IR.
- Calculation: V = 0.50 × 20.
- Answer: V = 10 V.
How Do You Find Potential Difference for a 60 W Lamp That Draws 0.261 A?
- Given: P = 60 W and I = 0.261 A.
- Formula: V = P/I.
- Calculation: V = 60 / 0.261.
- Answer: V = 230 V.
How Do You Find Potential Difference Between 2 Parallel Plates 5.0 mm Apart in a 2.0 × 10³ N/C Field?
- Given: E = 2.0 × 10³ N/C = 2.0 × 10³ V/m and d = 5.0 mm = 5.0 × 10⁻³ m.
- Formula: V = Ed.
- Calculation: V = (2.0 × 10³) × (5.0 × 10⁻³).
- Answer: V = 10 V.
How Do You Find Potential Difference Between 2 Points Near a 2.0 μC Point Charge?
- Given: Q = 2.0 × 10⁻⁶ C, rA = 0.50 m, and rB = 1.5 m.
- Formula: ΔV = VB − VA, with V = kQ/r.
- Calculation: VA = (8.99 × 10⁹ × 2.0 × 10⁻⁶) / 0.50 = 3.60 × 10⁴ V, and VB = (8.99 × 10⁹ × 2.0 × 10⁻⁶) / 1.5 = 1.20 × 10⁴ V.
- Answer: ΔV = −2.40 × 10⁴ V. The potential decreases with distance from a positive charge.
How Is Potential Difference Calculated in Series and Parallel Circuits?
In a series circuit, the potential differences across the components add up to the source potential difference, and in a parallel circuit, each branch has the same potential difference as the source. Table 2 lists the rules.
Table 2: Potential difference rules for circuits
| Circuit type | Rule | Formula |
|---|---|---|
| Series | The component potential differences add up | Vtotal = V1 + V2 + … + Vn |
| Parallel | Each branch has the same potential difference | Vtotal = V1 = V2 = … = Vn |
| Any closed loop | The potential differences around a loop sum to zero | ΣV = 0 |
What Is Kirchhoff’s Voltage Law?
Kirchhoff’s voltage law states that the sum of the potential differences around any closed loop equals zero. A 12 V source connected to 2 resistors in series, with 4.0 V across the first resistor, has 12 − 4.0 = 8.0 V across the second resistor.
How Do You Measure Potential Difference?
A voltmeter measures potential difference, and it connects in parallel across the component. The 3 steps are:
- Set the meter to the voltage function and the correct range, DC or AC.
- Connect the probes across the component, with the red probe on the higher-potential side.
- Read the value on the display.
What Are Typical Values of Potential Difference?
Typical potential differences range from millivolts in nerve cells to hundreds of volts in mains supplies. Table 3 lists 6 typical values.
Table 3: Typical potential differences
| Source | Typical potential difference |
|---|---|
| Resting nerve cell membrane | About −70 mV |
| AA alkaline battery | 1.5 V |
| USB port | 5 V |
| Car battery | 12 V |
| Mains supply in the United States | 120 V |
| Mains supply in most of Europe | 230 V |
What Is the Difference Between Potential Difference, Electric Potential, EMF, and Electric Field?
Potential difference is the difference in electric potential between 2 points, while EMF is the energy supplied per unit charge by a source. Table 4 compares 5 related quantities.
Table 4: Potential difference compared with related quantities
| Quantity | Symbol | Definition | SI unit | Type |
|---|---|---|---|---|
| Electric potential energy | U | Energy of a charge in an electric field | Joule (J) | Scalar |
| Electric potential | V | Potential energy per unit charge at a point | Volt (V) | Scalar |
| Potential difference | ΔV | Difference in electric potential between 2 points | Volt (V) | Scalar |
| EMF | ε | Energy supplied per unit charge by a source | Volt (V) | Scalar |
| Electric field | E | Force per unit charge, or potential difference per unit distance | N/C or V/m | Vector |
Equipotential lines, which connect points of equal potential, are always perpendicular to electric field lines, according to OpenStax College Physics.
What Mistakes Occur Most Often With the Potential Difference Formula?
5 mistakes occur most often with the potential difference formula:
- Confusing potential difference in volts with potential energy in joules.
- Connecting a voltmeter in series instead of in parallel.
- Using the EMF in place of the terminal potential difference when the battery has internal resistance.
- Ignoring the sign of ΔV = VB − VA.
- Using millimeters or centimeters in V = Ed without conversion to meters.
What Do People Also Ask About the Potential Difference Formula?
What Is the Formula for Potential Difference?
The formula is V = W/Q.
What Is the Formula for Potential Difference in a Circuit?
The circuit formula is V = IR.
What Is the Unit of Potential Difference?
The unit is the volt (V), where 1 V = 1 J/C.
Is Potential Difference the Same as Voltage?
Potential difference is the same as voltage, because voltage is the common name for electric potential difference.
Is Potential Difference a Scalar or a Vector?
Potential difference is a scalar quantity.
What Is the Potential Difference Between 2 Points at the Same Potential?
The potential difference is zero.
How Do You Find Potential Difference From an Electric Field?
Multiply the field strength by the distance along the field, V = Ed.
What Instrument Measures Potential Difference?
A voltmeter measures potential difference, and it connects in parallel.
What Is the Potential Difference Across Parallel Components?
Parallel components have the same potential difference.
What Is an Electron-Volt?
An electron-volt is the energy gained by a fundamental charge through a potential difference of 1 V, which equals 1.602 × 10⁻¹⁹ J.
What Are the Key Takeaways About the Potential Difference Formula?
The potential difference formula is V = W/Q, and the circuit form is V = IR. The 6 key takeaways are:
- Definition: Energy transferred per unit charge between 2 points.
- Energy formula: V = W/Q, or ΔV = ΔU/q.
- Circuit formula: V = IR for ohmic conductors, and V = P/I from power.
- Field formula: V = Ed for a uniform electric field.
- Unit: The volt, where 1 V = 1 J/C.
- Measurement: A voltmeter connected in parallel across the component.

The University of the West Indies
My passion as a teacher and leader in education is to contribute to students’ enhanced learning by creation of a positive teaching/learning environment, where they are motivated to develop strong critical thinking, analytical and problem-solving skills.
As acting Vice-Principal and head of Physics, I have amassed five years of experience in leading meetings, implementing strategies to maintain discipline and school ethos, liaise with stakeholders in planning for future development of the institution; successfully negotiated the implementation of various projects for student development as well as supervising effective execution of such. For the past 19 years, I have incorporated discovery learning within the classroom through practical activities, problem solving and cooperative learning and have realized that students retention in Physics and Mathematics have increased significantly.
I am always cognizant that students have different learning styles, and as such teaching strategies during planning and delivery must take this crucial factor into consideration and be tailored to meet such differences.

